Livros e Publicações

revista-materia-capa3

Revista Matéria, v.15, n.02 (2010)

Revista Matéria destina-se a publicação de trabalhos científicos originais nas áreas de Engenharia Metalúrgica, Engenharia de Materiais, Física da Matéria Condensada, Química e áreas afins.

Sumário
Matéria (Rio J.) vol.15 no.2 Rio de Janeiro  2010

Biodegradable polymer composites based on Brazilian lignocellulosic
Kestur, G. Satyanarayana

Evaluation of material properties and design requirements for biodegradable magnesium stents
Farè, Stefano; Ge, Qiang; Vedani, Maurizio; Vimercati, Gianmarco; Gastaldi, Dario; Migliavacca, Francesco; Petrini, Lorenza; Trasatti, Stefano

Thermal behavior of buriti biofoam
Monteiro, Sergio Neves; Rodriguez, Rubén Jesus Sanchez; Costa, Lucas Lopes da; Portela, Tammy Godinho Rodrigues; Santos, Nubia Suely Silva

Diameter dependence of tensile strength by Weibull analysis: Part I bamboo fiber
Costa, L.L. da; Loiola, R.L.; Monteiro, S.N.

Diameter dependence of tensile strength by Weibull analysis: Part II jute fiber
Bevitori, A. B.; Silva, I.L.A. Da; Lopes, F.P.D.; Monteiro, S.N.

Diameter dependence of tensile strength by Weibull analysis: Part III sisal fiber
Inacio, W.P.; Lopes, F.P.D.; Monteiro, S.N.

Charpy impact resistance of alkali treated curaua reinforced polyester composites
Ferreira, Ailton da Silva; Lopes, Felipe Perissé Duarte; Monteiro, Sergio Neves; Satyanarayana, Kestur Gundappa

Titanium dental implant surfaces
Elias, Carlos Nelson

Modeling of work hardening behaviour of high Mn and low C polycristalline austenitic steel with twip effect
Spindola, M.O.; Ribeiro, E.A.S.; Gonzalez, B.M.; Santos, D.B.

Cement composites reinforced by short curaua fibers
d’Almeida, A.; Toledo Filho, R.; Melo Filho, J.

Effects of temperature and strain rate on the tensile properties of twip steels
Curtze, S.; Kuokkala, V.-T.

The dynamic-mechanical behavior of epoxy matrix composites reinforced with ramie fibers
Margem, Frederico Muylaert; Monteiro, Sergio Neves; Bravo Neto, Jarbas; Rodriguez, Rubén Jesus Sanchéz; Soares, Bluma Guenther

Digital microscopy and image analysis applied to composite materials characterization
Paciornik, S.; d’Almeida, J.

Processing and characterization of dual phase steel foam
Gruttadauria, A.; Mombelli, Davide; Castrodeza, E. M.; Mapelli, C.

Tensile behavior of lignocellulosic fiber reinforced polymer composites: Part I piassava/epoxy
Nascimento, D.C.O.; Lopes, F.P.D.; Monteiro, S.N.

Tensile behavior of lignocellulosic fiber reinforced polymer composites: Part II buriti petiole/polyester
Portela, T.G.R.; Costa, L.L. da; Santos, N.S.S.; Lopes, F.P.D.; Monteiro, S.N.

Tensile Behavior of lignocellulosic reinforced polyester composites: Part III coir fiber
Santafé Júnior, H.P.G.; Lopes, F.P.D.; Costa, L.L.; Monteiro, S.N.

Sensitivity analysis of the ECAE process via 2k experiments design
Medeiros, Neil de; Moreira, Luciano Pessanha; Bressan, José Divo; Lins, Jefferson Fabrício Cardoso; Gouvêa, Jayme Pereira de

Dynamic behavior of gamma-irradiated polycarbonate
Weber, Ricardo Pondé; Vecchio, Keneth S.; Suarez, João Carlos Miguez

The use of fly-ash and rice-hull-ash in Al/SiCp composites: a comparative study of the corrosion and mechanical behavior
Pech-Canul, M. I.; Escalera-Lozano, R.; Montoya-Dávila, M. A.; Pech-Canul, M.

Young’s modulus of Al/SiCP/MgAl2O4 composites with different particle size distribution of reinforcements
Montoya-Dávila, M.; Pech-Canul, M.I.; Escalera-Lozano, R.; Pech-Canul, M.A.

Ultrafine grained structure development in steel with different initial structure by severe plastic deformation
Jozef, Zrnik; Sergey, Dobatkin V.; George, Raab; Martin, Fujda; Libor, Kraus

Processing and characterization of epoxy nanocomposites with Mwcnt’s/Cnf’s using thinky and 3-roll shear mixing techniques
Hosur, M.; Barua, R.; Zainuddin, S.; Jeelani, S.; Kumar, A.; Trovillion, J.; Pereza, Y.

A general study of commercially pure Ti subjected to severe plastic deformation: microstructure, strength and corrosion resistance
Mendes Filho, A.A.; Rovere, C.A.; Kuri, S.E.; Sordi, V.L.; Ferrante, M.

Stress-strain curves for steel fiber-reinforced concrete in compression
Oliveira Júnior, Luiz Álvaro de; Borges, Vanessa Elizabeth dos Santos; Danin, Alice Ribeiro; Machado, Daiane Vitória Ramos; Araújo, Daniel de Lima; El Debs, Mounir Khalil; Rodrigues, Paulo Fernando

Dynamic behavior of hydrogen desorption from pure iron and inconel 625 during elastic and plastic deformations
Takai, K.; Shoda, H

Thermodynamic study of non-metallic inclusion formation in SAE 1141 steel
Bielefeldt, Wagner Viana; Vilela, Antônio Cezar Faria

The effect of specimen dimensions on the propensity to adiabatic shear failure in Kolsky bar experiments
Rosenberg, Zvi; Ashuach, Yechezkel; Kreif, Rafael

Microstructural evolution of AA7050 al alloy processed by ECAP
Cardoso, E. K.; Guido, V.; Silva, G.; Botta Filho, W.; Jorge Junior, A.

Hardness evaluation, stoichiometry and grain size of titanium nitride films obtained with plasma nitriding on Ti-6Al-4V samples
Vasconcellos, Marcos Antonio Zen; Lima, Saulo Cordeiro; Hinrichs, Ruth

Gelatin/piassava composites treated by electron beam radiation
Takinami, P.Y.I.; Shimazaki, K.; Colombo, M.A.; Moura, E.A.B. de; Mastro, N.L. del

Evaluation of polypropylene/saw dust composites prepared with maleated polypropylene (mapp) produced by reactive extrusion
Trombetta, Ernani; Flores-Sahagun, Thais; Satyanarayana, Kestur G.

Effects of microstructure on the fatigue crack growth behavior of light metals and design considerations
Gavras, Anastasios G.; Chenelle, Brendan F.; Lados, Diana A.

Preparation and characterization of biodegradable composites based on Brazilian cassava starch, corn starch and green coconut fibers
Ramírez, María Guadalupe Lomelí; Muniz, Graciela I. Bolzon de.; Satyanarayana, Kestur G.; Tanobe, Valcineide; Iwakiri, Setsuo

A multi-scale investigation of the mechanical behavior of durable sisal fiber cement composites
Silva, Flávio de Andrade; Toledo Filho, Romildo D.; Mobasher, Barzin; Chawla, Nikhilesh

Processing of a duplex stainless steel by equal channel angular extrusion
Farias, F.A.; Pontes, M.J.H.; Cintho, O.M.

Vegetable fibers as multifunctional materials
Amico, S.C.

Deformation and fracture of an alpha/beta titanium alloy
Andrade, A.; Morcelli, A.; Lobo, R.

Characterization and exploitation of piston ring chips in the rectification process a new recycling proposal
Teixeira, A.; Dias, J. C.; Silva, E. M. da; Silva, M. R. da; Gontijo, M. R. F.

Effect of electron beam irradiation on mechanical properties of gelatin/Brazil nut shell fiber composites
Inamura, Patrícia Y.; Shimazaki, Kleber; Colombo, Maria Aparecida; Rosa, Ricardo de; Moura, Esperidiana Augusta Barretos de; Mastro, Nelida L. del

Cell adhesion on different titanium-coated surfaces
Resende, Cristiane X.; Lima, Ingrid R.; Gemelli, Enori; Granjeiro, José M.; Soares, Glória de A.

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons

Edição C0mpleta: http://www.scielo.br/scielo.php?script=sci_issuetoc&pid=1517-707620100002&lng=pt&nrm=iso